New Products
28.08.2006
Fuse terminals SK 1
The new SK 1 fuse terminals with screw connection system have been introduced to extend the CONTACONNECT range of products.
Two base terminals are available to fit the 5x20 and 5x25 miniature fuses that can be supplied with or without status indicators for various voltage ranges with negative-glow lamp, glow lamp or LED. Designed to be mounted onto TS 35 mounting rails, the terminal housings are made of glass-fibre reinforced polyamide and are heat resistant up to 140°C.
» Data Sheet
18.04.2006
NEWS 2006
Here we would like to inform you about our product nouvelities in the area CONTA-CONNECT, CONTA-ELECTRONICS and CONTA-CON.
21.04.2005
EKB Terminal Blocks
Europe-Terminal-Blocks
Starting immediately, with the series EKB (Europe Terminal Blocks) CONTACLIP
offers an inexpensive electrical screw terminal for direct assembling. EKBterminals
are available in different cross sections of 1.5mm² to 16mm² and 2
to 12 poles. There is a fixation hole for mechanical fixation between the individual
poles. The screws for electrical connecting are protected against self lokking
and installed into a polyamide housing in a way that they cannot be lost.
In the case of the "DS" versions, the wire protection reliably protects against
damage to the connected cores.
21.04.2005
KKB Ceramic Terminal Blocks
Elektrische Anschlusselemente für den Hochtemperaturbereich
The new ceramic KKB terminal blocks are another addition to electrical screw
connecting systems. Ceramic is the most natural and oldest material used for
electrical connecting in the world. Its most important features are heat resistance,
corrosion resistance, non-flammability and chemical resistance. These
terminal blocks make use possible at elevated temperature. The ambient temperature
is limited to a maximum of 350°C, since at higher temperature, the
ignition temperature of the bronze body is reached. The KKB blocks are available
in different cross sections from 2.5 mm² to 10mm² and 2- and 3 poles.
|
